• Qualified for Automotive Applications
• AEC-Q100 Qualified with the Following Results:
  - Device Temperature Grade 1: -40°C to 125°C
    Ambient Operating Temperature Range
  - Device HBM ESD Classification Level 2
  - Device CDM ESD Classification Level C3
• Wide Input Range: 3.8V-36V 
• Up to 5A Continuous Output Current
• 0.8V ±1% Feedback Reference Voltage
• Integrated 48mΩ High-Side 23mΩ Low-Side Power MOSFETs
• Pulse Skipping Mode at Light load
• 25uA Quiescent Current in Sleep Mode
• 100ns Minimum On-time
• Internal Soft-start Time: 4ms
• Adjustable Frequency 100KHz to 2.2MHz 
• External Clock Synonization
• EMI Reduction with Frequency Spread Spectrum (FSS) Modulation
• Precision Enable Threshold for Programmable UVLO Threshold Hysteresis
• Low Dropout Mode Operation
• Derivable Inverting Voltage Regulator
• Over-voltage Protection Over Temperature Protection 
• Available in an ESOP-8Package

The SCT2450Q is 5A synonous buck converters with wide input voltage, ranging from 3.8V to 36V, which integrates a 48mΩ high-side MOSFET a 23mΩ low-side MOSFET. The SCT2450Q, adopting the peak current mode control, supports the Pulse Skipping Modulation (PSM) with typical 25uA low quiescent current which assists the converter on achieving high efficiency at light load or stby condition. The SCT2450Q features adjustable switching frequency from 100 kHz to 2.2 MHz with an external resistor, which provides the flexibility to optimize either efficiency or external component size. The convertersupports external clock synonization with afrequency b from 100kHz to 2.2MHz. The SCT2450Q allows power conversion from high input voltage to low output voltage with a minimum 100ns ontime of high-side MOSFET.The SCT2450Q is an Electromagnetic Interference(EMI) friendly buck converter with implementing optimized design for EMI reduction. The SCT2450Q features Frequency Spread Spectrum FSS with ±6% jittering span of the 500kHz switching frequency modulation rate 1/512 of switching frequency to reduce the conducted EMI.The SCT2450Q offers cycle-by-cycle current limit hiccup over current protection, thermal shutdown protection, output over-voltage protection input voltage under-voltage protection. The device is available in an 8-pin thermally enhanced ESOP-8 package.

Application:

• USB Type-C Power Delivery, USB Charging
• Industrial Medical Distributed Power Supplies
• Automotive System

Parameter list

Technical information