• Wide Input Range: 4.5V-60V
• Up to 3A Continuous Output Current
• 0.8V ±1% Feedback Reference Voltage
• Integrated 80mΩ High-Side
• Low Quiescent Current: 80uA
• Pulse Skipping Mode (PSM) in light load
• 130ns Minimum On-time
•Programmable Soft-start Time
• Adjustable Frequency 100KHz to 1.2MHz
• External Clock Synonization
• Precision Enable Threshold for Programmable Input Voltage Under-Voltage Lock Out Protection (UVLO) Threshold Hysteresis
• Low Dropout Mode Operation
• Derivable Inverting Voltage Regulator
• Over-voltage Over-Temperature Protection
• Available in an ESOP-8 Package

The SCT2632A is 3A buck converters with wide input voltage, ranging from 4.5V to 60V, which integrates an 80mΩ high-side MOSFET. The SCT2632A, adopting the peak current mode control, supports the Pulse Skipping Modulation (PSM) which assists the converter on achieving high efficiency at light load or stby condition.The SCT2632A features programmable switching frequency from 100kHz to 1.2MHz with an external resistor, which provides the flexibility to optimize either efficiency or external component size. The converter supports external clock synonization with a frequency b from 100kHz to 1.2MHz. The SCT2632A allows power conversion from high input voltage to low output voltage with a minimum 130ns on- time of high-side MOSFET.The device offers fixed adjustable soft start to prevent inrush current during the startup of output voltage ramping. The SCT2632A features external loop compensation to provide the flexibility to optimize either loop stability or loop response.The SCT2632A provides cycle-by-cycle current limit, thermal shutdown protection, output over-voltage protection input voltage under-voltage protection. The device is available in an 8-pin ESOP-8 package.

Application:

• 12-V, 24-V, 48-V Industry Telecom Power System
• Industrial Automation Motor Control
• Vehicle Accessories

Parameter list

Technical information