• Wide Input Voltage Range: 2.7V-14.0V
• Wide Output Voltage Range: 4.5V-14.6V
• Fully Integrated High Side FET Rdson 13mΩ Low Side FET Rdson 11mΩ 
• Up to 12A Switch Current Programmable Peak Current Limit
• Typical Shut-down Current: 1uA
• Programmable Switching Frequency: 200kHz-2.2MHz
• Selectable PFM or Forced PWM Mode
• Programmable Soft Start
• Output Feedback Overvoltage Protection
• Thermal Shutdown Protection: 150°C
• Available in DFN-20 3.5mmx4.5mm Package

The SCT12A0 is a high efficiency, fully integrated synonous boost converter with a 13mΩ high-side MOSFET a 11mΩ low-side MOSFET, supporting 2.7V to 14V input voltage range up to 12-A switch current. The switch current limit can be adjusted with an external resistor. The device adapts constant off-time peak current control to provide fast transient response. An external compensation network allows flexibility setting loop dynamics to achieve optimal transient performance at different load conditions. Using MODE pin sets either Pulse Frequency Modulation (PFM) operation or forced Pulse Width Modulation (PWM) operation. The SCT12A0 monitors both output voltage feedback voltage to protect over-voltage condition. It features cycle-by-cycle peak current limit thermal shutdown protection when the device over loads current. SCT12A0 is available in a low-profile package DFN-20L 3.5mmx4.5mmx0.9mm with enhanced thermal power pad. 

Applications

Bluetooth Audio，Power Bank，POS System，E-Cigarette，Portable Power Tools，Electric Massager 

Parameter list

Technical information