• Fixed 5V Output      
• EMI Reduction with Switching Node Ringing-free
• 1.1MHz Fixed Switching Frequency with ±6% Jittering Span of Frequency Spread Spectrum
• Up to 2A Continuous Output Load Current
• Fully Integrated 140mΩ (Rdson) High Side MOSFET 70mΩ (Rdson) Low Side MOSFET
• 1uA Shut-down Current
• 22uA Ultra Low Quiescent Current
• LDO Mode
• Peak Current Mode Control with Integrated Loop Compensation
• PSM Mode in Light Load Condition
• 4ms Soft Start Time
• Output Over-voltage Protection
• Thermal Shutdown Protection at 160°C
• Available in TSOT23-6L Package

The SCT2325 is 2A synonous buck converter with 3.8V to 32V input range. Its output voltage is fixed at 5V to minimize external component counts. The device is EMI friendly features 20uA ultra-low quiescent operating current. The device fully integrates a 140mΩ high-side MOSFET a 70mΩ low-side MOSFET to provide high efficiency step-down DCDC conversion. The Pulse Skipping Modulation (PSM) with 20uA ultra-low quiescent current improves the power efficiency up to 88% at 5mA load. The SCT2325 implements Frequency Spread Spectrum (FSS) with ±6% jittering span of the 1.1MHz switching Frequency Spread Spectrum (FSS) with ±6% jittering span modulation rate 1/512 of switching frequency to reduce Electromagnetic Interference (EMI). The device has proprietary designed gate driver to achieve switching node ringing-free without sacrificing MOSFET on/off time further erasing high frequency radiation EMI caused by hard switching. The SCT2325 adopts peak current mode control with the internal integrated compensation network, which makes it easy to be used by minimizing the off-chip component count. The SCT2325 features output over-voltage protection, cycle-by-cycle peak current limit, thermal shutdown protection. The device is available in a low-profile TSOT23-6 package.


White Goods, Audio, Printer, DTV, STB