SCT9433FSAR

SCT9433FSAR

• 3.8V-36V Wide Input Voltage Range

• Up to 3A Continuous Output Load Current

• EMI Reduction

o Proprietary Gate Design for Switching Node Ringing-free

o Frequency Spread Spectrum (FSS)

• Pulse Skipping Mode (PSM) with 22uA Quiescent Current in Light Load Condition

o Up to 81% Efficiency at 1mA Light Load

o Up to 87% Efficiency at 10mA Light Load

• 0.8V ±1% Feedback Reference Voltage

• Fully Integrated 74mΩ Rdson High Side MOSFET 40mΩ Rdson Low Side MOSFET

• 1uA Shut-down Current

• 800kHz Switching Frequency

• Precision Enable Threshold for Programmable UVLO Threshold Hysteresis

• Output Over Voltage Protection

• Thermal Shutdown Protection at 170°C


DESCRIPTION:

The SCT9433 are 3A synonous buck converters with up to 36V wide input voltage range, which fully integrates an 74mΩ high-side MOSFET a 40mΩ low-side MOSFET to provide high efficiency step-down DCDC conversion. The SCT9433 adopts peak current mode control with integrated compensation network.The SCT9433 supports the Pulse Skipping Modulation(PSM) with typical 22uA Ultra-Low Quiescent.The SCT9433 are optimized for Electromagnetic Interference (EMI) reduction. The converter has proprietary designed gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on turn-off time, which further erases high frequency radiation EMI noise caused by the MOSFETs hard switching. The converter features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time.The SCT9433 offer output over-voltage protection, cycle-by-cycle peak current limit, thermal shutdown protection. The device is available in a lowprofile QFN-9L 3mm X 2mm package.

APPLICATION:

• Automotive System
• Industrial Control System
• General Consumer